PCTFE machining has been mentioned more and more. In short, it is the fusion of two chemical polymers through processing to make their properties meet the corresponding use standards. PCTFE itself is a crystalline polymer. According to different processing techniques, it can form different characteristics, so the application field is relatively wide, and the key depends on how to operate during processing.
Duratron PAI polyamide-imide (PAI) profiles are well-established, widely used and proven in both extrusion and moulding grades. In high temperature applications, this advanced material combines excellent mechanical properties with very good dimensional stability. Duratron PAI is the highest performance, meltable plastic. It has outstanding high temperature resistance. Operates at high load pressures and sustained temperatures up to 260°C. Parts machined from Duratron profiles have higher compressive and impact strengths than most advanced engineering plastics.
Duratron D7000 PI (color: natural/maroon) has a temperature resistance between Duratron PAI and Duratron PBI. It is of particular value at temperatures beyond what the Duratron PAI can handle and when the Duratron PBI is too expensive. Several Duratron PI products are available for structural and wear-prone applications, and are available in a wide range of sizes - especially for thicker plates, larger decks and thick-walled pipes. In addition to being more resistant to high temperatures, Duratron D7000 PI has very good mechanical properties.
Duratron® PBI PBI (Celazole) Polybenzimidazole PBI Sheet, PBI Rod, Celazole Sheet, Celazole Rod, Duratron Sheet, Duratron Rod Duratron CU60 PBI is the highest performance engineering thermoplastic currently available. It has the highest heat resistance and mechanical properties of all unfilled plastics at temperatures above 205°C.
The English name of PEI Chinese polyetherimide board is Polyetherimide, PEI belongs to amorphous plastics. It is an amorphous high-performance polymer, which is extruded from engineering plastics made of amorphous PEI (polyetherimide) at high temperature by an extruder. At present, the commonly used PEI board is the raw material (Ultem) of GE in the United States. In 1972, GE of the United States began to research and develop PEI.
The Duratron® trademark includes 4 major categories of materials, each of which is subdivided into modified grades. Each modified material has different characteristics and applications. If necessary, please consult the professional sales team of Chengtu Plastics for detailed answers;
